250Y Metal Corrugated Plate Packing Stainless Steel Structured Packing For Distillation Column
description1
|
Parameter |
Value |
Unit |
Test Condition |
Remark |
|
Specific Surface Area |
250 |
m²/m³ |
Nominal |
Y-type standard |
|
Void Fraction |
≥97 |
% |
— |
304 / 316L stainless steel |
|
Theoretical Plates |
≥2.3 |
N/m |
F-factor = 1.5 m/s·(kg/m³)^0.5 |
Air-water system |
|
Pressure Drop |
≤300 |
Pa/m |
F-factor = 2.0 m/s·(kg/m³)^0.5 |
Per meter of packing |
|
Corrugation Inclination |
45 |
° |
Y-type |
Standard angle |
|
Maximum Flooding F-factor |
≥2.8 |
m/s·(kg/m³)^0.5 |
Flooding point |
Depends on material grade |
Metal Corrugated Plate Packing Product Introduction
250Y Metal Corrugated Plate Packing is a typical metal structured packing widely used in mass transfer separation equipment. It is manufactured by stamping stainless steel sheets into regular inclined corrugations and assembling them alternately. The uniform corrugated structure forms stable gas-liquid flow channels inside the tower.
This packing realizes continuous contact between gas phase and liquid phase, greatly improving mass transfer efficiency. With high void fraction, low pressure drop and large processing capacity, 250Y metal corrugated structured packing performs stably under long-term continuous operation.
We can supply 250Y corrugated plate packing in 304, 316L stainless steel and other materials. It is extensively applied in distillation, rectification, absorption, stripping and solvent recovery towers for petrochemical industry, fine chemical engineering, pharmaceutical production and environmental protection projects. Customized size, height and assembly requirements are acceptable to match different tower equipment.