Heat Resistant Plastic Flat Ring for Cooling Tower Packing
description1
|
Product Name |
Plastic Flat Ring |
||||
|
Material |
PP,PE,PVC,CPVC,PVDF ,etc |
||||
|
Life Span |
>3 years |
||||
|
Size Inch/mm |
Surface Area m2/m3 |
Void Volume % |
Packing Number pieces/ m3 |
Dry Packing Factor m-1 |
|
|
1” |
25×9×1.0 |
160 |
88 |
170000 |
287 |
|
1-1/2” |
38×13×1.2 |
145 |
92 |
460000 |
175 |
|
2” |
50×17×1.5 |
128 |
93 |
21500 |
140 |
|
3” |
76×26×2.5 |
116 |
93 |
6500 |
112 |
|
Feature |
High void ratio, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high efficiency of mass transfer. |
||||
|
Advantage |
1. Their special structure make it has big flux, low pressure drop, good anti-impaction capability. 2. Strong resistance to chemical corrosion, large void space. energy saving, low operation cost and easy to be load and unload. |
||||
|
Application |
These various plastic tower packing are widely used in petroleum and chemical,alkali chloride,gas and environmental protection industries with max. temperature of 280°. |
||||
Conjugate Ring Selection Recommendations
Plastic flat rings are available in a range of specifications, featuring common diameters such as 25mm, 38mm, 50mm, and 76mm, among others. These products, manufactured from various materials and designed to specific standards, are tailored for use in diverse sectors. They are frequently employed within the chemical and petrochemical industries, sewage treatment facilities, air purification systems, and environmental protection applications.
Large flux: The special structural design makes the fluid flow in the packing layer smoother, and can pass a larger fluid flow, which improves the processing capacity of the equipment.
Low pressure drop: The pressure loss of the fluid when passing through the packing layer is small, which reduces energy consumption and operating costs. This is particularly important for large-scale industrial production and can save a lot of energy costs.
Strong impact resistance: It has good mechanical strength and stability, can withstand a certain degree of fluid impact and vibration, is not easy to damage, and extends the service life of the packing.
High mass transfer efficiency: The high porosity and uniform gas-liquid contact enable the gas-liquid two phases to fully contact and transfer mass on the packing surface, effectively reducing the axial back mixing of the packing layer, improving the liquid-liquid mass transfer efficiency, and thus improving the separation effect.
Good chemical stability: Made of corrosion-resistant plastic materials such as polyethylene (PE), polypropylene (PP), polyvinyl chloride (PVC), it has good tolerance to a variety of chemical substances such as acids, alkalis, and salts, and is suitable for the treatment of various corrosive media