Metal Corrugated Plate Packing 500Y Stainless Steel Corrugated Structured Packing For Separation Absorption Tower
description1
|
Parameter |
Specification |
Unit |
Material Option |
Standard |
Remarks |
|
Model |
500Y |
— |
SS304 / SS316L / 2205 |
Custom |
Corrugated angle 45° |
|
Specific Surface Area |
500 |
m²/m³ |
All grades |
Nominal |
±5% tolerance |
|
Void Fraction |
≥ 92 |
% |
All grades |
Dry packing |
Measured before assembly |
|
Theoretical Plates |
4–5 |
N/m |
All grades |
Standard test |
At F-factor 1.5–2.5 |
|
Pressure Drop |
100–250 |
Pa/m |
All grades |
Load test |
At normal operating load |
|
Operating Temperature |
≤ 400 |
°C |
SS304 / SS316L |
Material limit |
2205 up to 450°C |
Metal Corrugated Plate Packing Product Introduction
500Y Metal Corrugated Plate Packing is a typical type of metal structured packing widely applied in various separation towers. It is manufactured by precisely stamping stainless steel sheets into regular inclined corrugations, then assembled into integral packing modules. The corrugated plates are arranged alternately, forming uniform gas-liquid flow channels inside the column.
This structured packing creates continuous and stable interfaces for gas and liquid media. When fluid flows through the orderly corrugated channels, gas and liquid can achieve full, even contact, greatly improving mass transfer efficiency. Compared with random packing, it features lower pressure drop, higher handling capacity and more stable separation performance.
We can supply 500Y metal corrugated plate packing made of SS304, SS316L and 2205 duplex stainless steel. Different material choices enable the packing to adapt to high temperature, weak acid, weak alkali and other corrosive working environments. The diameter of packing modules can be customized according to customers’ tower sizes, which is convenient for on-site installation and maintenance.